Squat Rack

Core Functional Advantages

1. Humanized Open Half-Cage Design, Unrestricted Full-Range Lifting

Adopt open-front half rack architecture without front vertical bars, offering wide access for barbell unracking, bench press entry, walking lunges and rack pulls, greatly speeding member turnover during peak gym hours. Four 75×75mm main uprights paired with widened trapezoidal anti-tip base, full triangular welded reinforcement eliminates frame wobble under dynamic heavy squat & press loads. Numbered laser adjustment holes evenly distributed along uprights, fit trainees from 150cm teens to 198cm tall elite athletes for fast height matching without repeated measuring. Dual-side multi-layer 50mm Olympic plate sleeves store weights neatly to tidy training zones; 6 bottom band anchor pegs enable progressive resistance band training to expand workout programming.

2. Multi-Stage Full Safety Protection, Zero Fall Risk For Solo Lifting

• 1.HDPE thick padded J-hooks: shock-absorbing anti-slip rubber lining locks barbell firmly to prevent side slip, also protecting chrome bar surface from scratches, each pair rated for 400kg load with quick-release snap fasteners.
• 2.Dual-height independent safety spotter arms: lower level catches bar during failed squats, upper level secures bench press misses, thick rubber buffer sleeves reduce impact noise & vibration, single arm holds up to 400kg.
• 3.All frame edges fully rounded without sharp corners; thick anti-slip rubber foot pads protect gym flooring and eliminate sliding, optional floor bolt holes for extra stability. Beginners master free-weight form with drastically lower injury risk; powerlifters safely hit max personal records without spotter assistance, improving independent training confidence for all gym members.

3. Heavy-Duty Commercial Steel Frame, No Deformation After Years Of Heavy Use

Main uprights are 75×75mm national standard thick rectangular tube, 3mm wall thickness, double steel triangular reinforcement at all load-bearing joints. Fully automatic robotic full-seam welding followed by high-temperature stress relief to remove internal welding tension, preventing upright bending and weld cracking under years of max-load lifting. Double-layer electrostatic powder coating with sandblasting anti-rust primer base, matte scratch-resistant finish resists sweat corrosion, humid gym air and daily impact, retaining intact appearance without paint peeling or rust long-term. All hardware, hooks and spotter arms use 304 stainless steel & quenched wear-resistant craft, anti-rust and smooth to adjust. No consumable sliding bearings required, near zero maintenance drastically cuts gym later labor & material costs for superior long-term operational value.

4. All-In-One Multi-Function Rack To Complete Full Strength Matrix, High-Revenue Gym Essential

One single machine covers all full-body push/pull/lower-body compound movements, pairing with adjustable weight bench for complete barbell free-weight training:

• Lower body: Back squat, Romanian deadlift, walking lunge, rack calf raise;
• Chest & shoulder: Flat bench press, incline press, standing overhead press, close-grip press;
• Back & triceps: Wide/narrow grip pull-up, bent-over barbell row, barbell tricep extension;
• Functional power: Band-assisted squat, weighted static hold training. Matched with smith machine, 45° leg press, hack squat and shoulder press machines, it forms a complete free-weight strength training matrix.
• General gym members: Standardize barbell movement patterns to balance full-body muscle mass;
• Powerlifting & competitive athletes: Heavy base strength development for competition prep;
• Personal training studios: All-in-one unit maximizes training capacity for small space PT sessions;

Premium Commercial Manufacturing Craftsmanship

1.75×75mm Heavy Triangular Reinforced Steel Frame, Robotic Seamless Welding Four main uprights of 75×75×3mm heavy rectangular tube, double steel triangular reinforcement on base joints and hook mounting points, fully automatic robot continuous full welding with zero hollow weld defects. Post-weld high-temperature stress relief eliminates structural tension to avoid permanent deformation under long max loads. Net machine weight 210kg, widened integrated trapezoidal base with four thick anti-slip rubber foot pads, zero shift or tipping under full unilateral 400kg barbell load.

2.Wear-Resistant Cushioned Attachments & Full 304 Stainless Hardware, Ultra-Low Maintenance J-hooks and safety spotters wrapped with high-density polyethylene rubber for shock absorption, noise reduction and bar scratch prevention. All bolts, weight sleeves and adjustment latches are manufactured from 304 stainless steel for superior rust resistance, offering smooth tight adjustment free of slipping or loosening over years of heavy use. No periodic oiling or bearing replacement required, slashing gym maintenance labor and spare part expenses year-round.

3.Strict Pre-Delivery Full Testing, CE International Commercial Safety Compliance Every squat rack undergoes rigorous pre-factory certification tests: 800kg static full load bearing, 100,000-cycle bar drop fatigue test, overall lateral stability test and mounting hole limit load test. All frame edges are fully rounded and polished; dual anti-drop limit locks on J-hooks & spotter arms form dual-layer fall prevention system. The unit fully complies with CE international commercial fitness safety standards, with durability and safety ratings far superior to lightweight household squat stands, making it a high-return long-term core free-weight investment for gym operation.

Technical Specification Sheet

Standard Training Guidance

Mode 1: Standard Back Squat (Primary Lower Body Mass Builder)

1.Adjust J-hooks to shoulder unracking height, rest bar across upper trapezius, grip bar evenly on both sides, stand feet shoulder-width apart with toes slightly outward.

2.Hinge hips & knees backward to squat, push hips rearward while tracking knees aligned with toes until thighs reach parallel to ground, squeeze glutes & legs hard for 2 seconds at bottom peak.

3.Drive upward fully via heel push-off, maintain neutral lumbar spine throughout the set; position safety spotters directly below squat depth to catch bar in case of failed lift. Prohibited: Excessive knee forward drift, rounded lumbar spine, tiptoe stance, inertial bouncing to stand.

Mode 2: Flat Barbell Bench Press (Primary Chest Builder)

Pair with adjustable flat bench, set J-hooks and safety spotter height aligned with mid-chest, lower bar to sternum and press evenly back to full extension; lower safety arms fully catch bar if user loses control.

Mode 3: Pull-Up & Bent-Over Barbell Row (Back Development)

Use top multi-grip pull-up bar for wide/narrow grip lat training; unrack bar to low starting position for bent-over barbell rows to build full back thickness.

Training Volume Reference

• General Hypertrophy & Shaping: 3–4 sets × 10–15 reps;
• Powerlifting Heavy Strength Breakthrough: 4–5 sets × 3–8 reps;
• Low-Load Posture Rehabilitation Training: 3 sets × 12–18 reps with light weight.

Closing CTA

To equip a stable, multi-functional space-saving commercial squat rack with full safety coverage for beginner form coaching and elite athlete max-strength breakthrough, the Yingruis Commercial Open-Frame Squat Rack is an irreplaceable flagship core equipment for gym free-weight zones. Powered by mature 75×75mm heavy load steel frame and user-friendly open half-cage design, dual-layer graded safety spotters plus anti-slip padded J-hooks deliver dual fall prevention protection, while the all-in-one multi-lift compatible layout balances training versatility, injury safety and long-term heavy commercial rugged durability. As a direct factory supplier, we provide full customization services on frame color, laser logo engraving and structural dimensions, with fast delivery from abundant ready stock and complete long-term full-machine after-sales warranty services. It is the optimal cost-effective choice for outfitting new gym free-weight areas, upgrading existing fitness facilities, and purchasing professional gear for sports teams & personal training studios.