Multi-Adjustable Bench

Core Upgraded Functional Advantages

1.Gen 2 Widened Inverted Triangle Low-Center Frame, Max 600kg Load Capacity, Zero Slip Under Full Weight Upgraded widened ground-hugging inverted triangular base with 12cm extra width vs old version, greatly eliminating bench head lift and side sliding during heavy bench press. Main frame constructed from heavy Q235 rectangular tube 100×50mm, 3.0mm wall thickness, double triangular steel plate reinforcement on all load-bearing joints, max static load upgraded to 600kg (1320 lbs), fully suitable for elite powerlifting max-load training. Four full-wrapped thick anti-slip rubber foot pads reduce noise and protect gym flooring; integrated hidden front transport wheels with external pull handle allow single-person easy relocation without lifting the whole bench.

2.18-Position Heavy Closed Gear Disc Lock, Full Range Segmented Angles, Anti-Loose Latches The backrest is fitted with heavy stainless steel large-diameter closed gear lock mechanism with 18 numbered adjustment positions, ranging from -15° decline to 85° upright; the seat has 3 independent tilt angles. Thick spring bite latches stay firmly locked without shifting under heavy load:

3.

-15° Decline: Target lower chest & weighted abs crunch;

0° Flat: Full pectoralis major & standard flat barbell bench press;

30°/45° Multi-Stage Incline: Build upper chest mass & thicken anterior deltoids;

80°–85° Upright: Seated dumbbell shoulder press, lateral raise & front raise. Clear numbered gear positions let trainees memorize fixed workout angles, one-click fast angle switching improves member flow efficiency during peak gym hours.

Extended 3-Section 68mm High-Density Cold-Cure Foam Upholstery, Ergonomic Fit, No Long-Term Collapse Upgraded extended backrest + split independent seat cushion filled with 68mm high-density cold-molded foam, resistant to hardening & collapse after tens of thousands of heavy compression cycles. The surface is wrapped with commercial thick sweat-proof stain-resistant PU leather, easy to wipe clean, no cracking or peeling after 3–5 years of heavy commercial use. 3-segment curved design perfectly fits shoulder, back and lumbar physiological curve, evenly dispersing body pressure during pressing & crunching to reduce local soreness on spine and scapula. Optional extended detachable leg roller enables isolated quadriceps and hamstring training.

All-In-One Universal Matching Trainer, Complete Full Free-Weight Matrix & Space Cost Saving This single bench replaces flat bench, incline bench, decline bench, roman chair and leg trainer, cutting gym procurement budget and floor occupation, fully compatible with all free weights & plate-loaded strength equipment:

• High-End Commercial Multi-Zone Gyms: Standard upgraded staple for full chest/shoulder/leg/core hypertrophy training for all members;
• Powerlifting & Hyrox Functional Iron Gyms: 600kg upgraded ultra-high load capacity for max-load bench press and compound explosive training;
• Pro Sports Conditioning Centers: Standard hammer-style uniform bench for full team basic strength training;
• Personal Training Studios: Multi-angle design for posture correction, fat loss & muscle gain PT courses;
• Premium Home Garage Gyms: Extended stable frame fits tall users for full home dumbbell & barbell workouts.

Long-Lasting Commercial Wear-Proof Finish, Near-Zero Maintenance For All-Day Heavy Use The whole frame adopts double-layer high-temperature electrostatic sandblasting powder coating (classic matte red finish as shown in picture), with anti-rust primer base to resist sweat corrosion, gym bumps and scratches, free of paint peeling & rust spots long-term. All adjustment gear, latches, spindles and fixing bolts are made of 304 stainless steel to avoid rust & jamming in humid gym environments. No plastic vulnerable transmission parts equipped; daily maintenance only requires upholstery wiping, drastically cutting gym later labor & spare part costs. All frame edges are fully rounded and polished without sharp corners to prevent user cuts & scrapes.

Premium Commercial Manufacturing Craftsmanship

1.Heavy 100×50mm Rectangular Tube Widened Inverted Triangle Frame, Robotic Full Seam Welding & Stress Relief Full frame reinforced with double triangular stiffeners, fully automatic seamless robotic welding followed by high-temperature stress relief to eliminate internal welding tension and prevent permanent frame bending under full 600kg load. Net machine weight reaches 56kg for enhanced inherent anti-tip & anti-slip stability.

2.Heavy-Duty Thickened Closed Gear Lock System + Full 304 Stainless Steel Hardware Enlarged diameter adjustment gear disc with deeper engagement teeth for stronger lock load capacity; all adjustment latches, wheel axles and fixing screws are 304 stainless steel for superior moisture & rust resistance, delivering smooth long-term adjustment free of slipping.

3.Strict Pre-Delivery Safety Testing, CE International Commercial Fitness Compliance Every Gen 2 adjustable bench undergoes full 600kg static load compression test, 100,000-cycle bench press fatigue test, latch anti-loosening test and lateral anti-tip stability test before shipment. Dual safety design plus fully rounded edges fully complies with CE international commercial fitness safety standards, far more durable than old basic version and lightweight household folding benches.

Technical Specification Sheet

Standard Training Guidance

1.Flat Barbell / Dumbbell Bench Press (Build Full Chest Thickness) Set backrest to 0° flat position, lie fully against the 3-section upholstery, lower bar evenly to mid-chest then press back steadily, keep lumbar spine tight against the pad and avoid hollowing lower back for compensation.

2.45° Incline Dumbbell Press (Upper Chest & Anterior Deltoid Shaping) Adjust backrest to 30°–45° incline to fill upper chest hollow and fix sagging chest contour, boost anterior shoulder fullness.

3.-15° Decline Press / Weighted Crunch (Isolate Lower Chest & Lower Abs) Switch to negative decline angle to target weak lower chest muscles and perform weighted crunch to tighten loose lower abdomen.

4.85° Upright Seated Dumbbell Shoulder Press (Full Deltoid Mass Gain) Lock backrest in upright position for seated dumbbell overhead press, stabilize lumbar spine and safely build overall shoulder volume.

5.Bent-Over Dumbbell Row (Increase Back Thickness) Tilt seat to low forward angle, stabilize upper torso for dumbbell rows to thicken mid-back and latissimus dorsi width.

6.Optional Extended Leg Roller: Leg Extension & Leg Curl Attach extended leg support roller for isolated quadriceps and hamstring training to balance anterior & posterior lower leg muscle contour.

Closing CTA

To upgrade your gym with a premium hammer-style extended adjustable bench featuring 600kg ultra-high load capacity, widened low-center base eliminating bench tipping & sliding during heavy pressing, and extended 3-section upholstery fitting tall trainees, the Yingruis Adjustable Pro Bench 2 Gen 2 Multi-Functional Weight Bench is an irreplaceable flagship upgrade matching equipment for high-end commercial gyms, Hyrox functional conditioning halls, powerlifting facilities and personal training studios. Powered by mature upgraded widened inverted triangular heavy load frame and 18-position closed safety gear adjustment system, it supports full-range training angles with thick 68mm waterproof long-wearing upholstery and front transport wheels for effortless single-person relocation. We are a professional fitness equipment manufacturer based in Dezhou, China, providing one-stop sourcing for cardio, strength, Pilates and Hyrox complete gear, with full customization services on frame color and laser logo engraving, fast stock delivery and complete long-term full-machine after-sales warranty services. It is the optimal cost-effective upgrade matching choice for outfitting new high-end gym strength zones, renovating Hyrox functional training facilities, replacing outdated gym benches, and purchasing full training gear for professional sports conditioning centers.